| | |

dstream、dstream-pg网赌软件

文章来源:米尔科技 发布日期:2019.4.24 浏览次数:2980 次

arm dstream高性能调试和跟踪单元可在任何基于arm处理器的硬件目标上实现强大的软件调试和优化。
借助用于许多开发平台的加速硬件启动和用于第三方工具的开放式调试接口等功能,dstream调试器在与arm development studio配合使用时为复杂soc的开发和调试提供了全面的pg电子娱乐试玩的解决方案。

support for armv8

support for armv8

arm构建的调试和跟踪直到armv8。 无论是经典还是最新产品,dstream都涵盖了它。

 

lightning fast trace

lightning fast trace

使用hsstp跟踪探针进行高达19.2 gbps的并行跟踪或高达20 gbps的串行跟踪。

 

lightning fast trace

extended trace buffer

即使在最快的目标上捕获扩展跟踪,也可以获得软件执行的详细信息。

 


lightning fast trace

flexible debug

适用于jtag,coresight,ti和mipi的适配器。 与第三方ip和调试器兼容,为您提供最大的灵活性。

compare dstream units



dstream dstream-st dstream-pt
debug connectivity jtag and serial-wire debug
arm processor support

any arm processor based hardware target up to armv8 with coresight trace supported

functionality debug, parallel trace debug, streamed trace debug, parallel trace
on target trace yes yes  yes
external parallel trace 9.6 gbps (up to 16 pins) 2.4gbps (up to 4 pins) 19.2gbps (up to 32pins)
external serial trace trace can either be collected using the default parallel trace probe supplied with dstream or alternatively, using the high-speed serial trace probe (hsstp), available separately. this allows for high bandwidth serial trace capture of up to 20 gbps from arm hsstp or marvell® setm. - -
 
specifications
maximum number of supported cores 128* (see cores coresight devices limit) 1022* (see cores coresight devices limit) 1022* (see cores coresight devices limit)
cores coresight devices limit  254 (up to 128 cpus) 1022 
or support for up to 1022 coresight devices (including cpus)
support for up to 1022 coresight devices (including cpus)
target connectors
  • 14-pin & 20-pin arm jtag
  • 14-pin ti omap
  • 10-pin & 20-pin high-density coresight connectors
  • 38-pin mictor
  • 34-pin mipi
  • 60-pin mipi (qsh-60) via optional adapter
  • 20-pin arm jtag
  • 14-pin ti omap
  • 10-pin & 20-pin high-density coresight connectors
  • 38-pin mictor
  • 20-pin arm jtag connector
  • 14-pin ti jtag connector
  • 10-pi & 20-pin high-density coresight connectors
  • mipi-60 (qsh) connector
  • single (16 bit) and dual (32 bit) mictor 38 connectors
jtag frequency  60 mhz 180 mhz 180 mhz
memory download up to 2.5 mb/s up to 12 mb/s up to 12 mb/s
trace buffer 4 gb none - streamed to host pc on probe 8gb trace memory store
host connectivity usb 2.0, ethernet usb 3.0, gigabit ethernet (for direct or remote host connections) usb 3.0, gigabit ethernet (for direct or remote host connections)
3rd party support flexible architecture to support 3rd party ip and debuggers
device bring-up and test utilities
remote target reset
trace capture 16-bit wide trace capture at 300 mhz ddr (600 mbit/s per pin) 4-bit wide trace capture at up to 300 mhz ddr (600 mbit/s per pin) 32-bit wide trace capture at up to 300 mhz ddr (600 mbit/s per pin)
interface vref 1.2v - 3.3v (configurable by target) 1.2v - 3.3v (configurable by target) 1.2v - 3.3v (configurable by target)
software requirements arm development studio or ds-5 arm development studio and ds-5 5.27 or newer arm development studio 2019.0 or newer
  learn more learn more learn more


本文来自pg网赌软件-pg电子娱乐试玩科技,原文地址: http://www.myir-tech.com/resource/516.asp,转载请注明出处。

比较和选型

手册教程

应用笔记

好书推荐

pg网赌软件的技术支持服务指南

常见问题解答

网站地图